Search Entire Site
- Search Within
- KnowledgeBase
KnowledgeBase Results
|
Why does my LabVIEW Real-Time system display “bit mapping 0” on the console?
My LabVIEW RT system is using a camera link board and every time if I select the board in Measurement & Automation Explorer,
digital.ni.com/public.nsf/allkb/D5E0BDE4F32AE91686257B35005F5D6D
|
|
Why Do I Get an Unknown Property: 'Data (Output Events)' Error When I Compile LabVIEW FPGA Code on an NI 8254R or NI 8255R Target?
When I compile LabVIEW FPGA 2012 SP1 code on an NI PCI-8254 or NI PCIe-8255R target, the compilation fails with the the error Unknown Property: "Data (Output Events)", ...
digital.ni.com/public.nsf/allkb/AA5900E8F47DF1F686257B5E00500EB7
|
|
Network and System Troubleshooting for the NI 177x Smart Camera
My NI 177x Smart Camera does not show up in Measurement & Automation Explorer or Vision Builder AI (VBAI), the software on it is corrupt, or the software does not ...
digital.ni.com/public.nsf/allkb/3569E73B8B865C0986257B59005FA2AF
|
|
What Are The Differences Between Base, Medium, and Full Camera Link Configurations?
I want to use a Camera Link camera. I see that they are available in Base, Medium, Full, and Extended-Full configurations. What do the different configurations mean? ...
digital.ni.com/public.nsf/allkb/2EE80B8C381D61D286257B1F005674A5
|
|
Why Do I Get Timeout Error -1074397150 at IMAQ Get Buffer?
I am performing a sequence acquisition using the NI-IMAQ driver, but I get timeout error -1074397150 at IMAQ Get Buffer. I am only getting some of the frames acquired.What ...
digital.ni.com/public.nsf/allkb/1DED189C3AD0742C86257AC300699D5D
|
|
Why Is My CameraLink Image Acquisition Slower Than Expected?
I am using triggered acquisition with a CameraLink camera and an NI framegrabber. It seems to be working fine at low trigger rates. However, when I increase the ...
digital.ni.com/public.nsf/allkb/6FFA526966E2D29386257AA80054730A
|
|
Vision Builder for Automated Inspection Version Compatibility with Smart Cameras, Compact Vision Systems, Embedded Vision Systems, and Frame Grabbers
I need to know which versions of Vision Builder for Automated Inspection (AI) are supported by my Smart Camera, Compact Vision System (CVS), Embedded Vision System ...
digital.ni.com/public.nsf/allkb/1639F101924A347086257990006C99FE
|
|
How Do I Deploy a Startup Executable to my Real-Time Controller?
I believe I have properly deployed a startup executable to my real-time controller, but I am not sure. Assuming the executable is deployed properly, why does it ...
digital.ni.com/public.nsf/allkb/B37FA04A1CB84B6C862571A30060EF03
|
|
How Do I Synchronize a NI 177x Smart Camera with a Time Server?
I have a NI 177x Smart Camera and I want to synchronize it with an SNTP time server, but there is no option in Measurement & Automation Explorer (MAX) to specify ...
digital.ni.com/public.nsf/allkb/402F0F07F851768486257A1B0063EE88
|
|
Why Do I See Image Tearing With My PixeLINK Camera and How Can I Eliminate This?
I notice that when I attempt to grab images in Measurement & Automation Explorer at a resolution lower than the default Format 7, I see image tearing. In other words, ...
digital.ni.com/public.nsf/allkb/5C22225F85E015BD862579250062578D
|
|
Why Do I Get Error 0xBFF60092: The Requested Serial Termination String Was Not Found in the Returned Buffer?
I am trying to acquire from my camera link camera and am getting the following error: Error 0xBFF60092: The Requested Serial Termination String Was Not Found in ...
digital.ni.com/public.nsf/allkb/9FB5514DD6E905D386257A05008033A8
|
|
Why Is Part of My Image Darker Than the Other?
I'm using a digital camera frame grabber board with my parallel digital or CameraLink camera, but half of my image is darker than the other. Why is part of the image ...
digital.ni.com/public.nsf/allkb/C8E5A924AA035E5C862579AC007C3354
|
|
Why does my Point Grey DirectShow camera not show up in MAX?
Why can't I see my Point Grey DirectShow camera in MAX even though I have installed the drivers?
digital.ni.com/public.nsf/allkb/7DF278AF77461951862579AD0063B9AD
|
|
Using the a Smart Camera 17XX Digital Output lines
I am configuring a digital output in VBAI or LabVIEW on my Smart Camera and am measuring the output with a DMM but am not seeing any output. How can I get my smart ...
digital.ni.com/public.nsf/allkb/108E31B4C4E7B9A886257A0900579C8C
|
|
What is the Transfer Speed of Each Vision Acquisition Bus?
What bus characteristics should I consider when choosing a vision acquisition device interface?
digital.ni.com/public.nsf/allkb/E0F41D51407267E486257A080059A71E
|
|
How can I read in a trigger signal and route it directly to my Camera Link camera via the Camera Control Line (CCL)?
I would like to be able to send my camera link camera an external trigger signal. How can I route this signal through the camera link frame grabber to use the camera ...
digital.ni.com/public.nsf/allkb/38E46AE6989321EA8625799F0061832B
|
|
How Can I Change My FPGA Code from 1-Tap to a 2-Tap Configuration?
I would like to use the 1-Tap 10-Bit Camera with Frame Trigger.lvproj example with my Camera Link camera. However, my camera is 2-Tap. How can I modify this example ...
digital.ni.com/public.nsf/allkb/EA1727D8D620B81F8625797B0072257C
|
|
How do I use the Console Out port on my NI Smart Camera?
I'd like to be able to see useful diagnostic information about my NI Smart Camera. How can I use the Console port on the NI Smart Camera to do this?
digital.ni.com/public.nsf/allkb/2632DD4856ED97148625797B005ADEA7
|
|
MAX Error 56 When Communicating With a LabVIEW Real-Time Controller
I receive Error 56 in Measurement & Automation Explorer (MAX) when I try communicating with my real-time (RT) controller. The error occurs in one or more of the ...
digital.ni.com/public.nsf/allkb/922DDC440FCB15048625719D006FCB97
|
|
How Can I Connect Multiple Video Signals to an Analog IMAQ Device?
The PXI-1409 and PCI-1410 are capable of acquiring images from up to 4 cameras. What options do I have for configuring multiple cameras for my imaging application?
digital.ni.com/public.nsf/allkb/FF3C5C368E34A12286256AC6004BD844
|
KnowledgeBase Results
Search Syntax Summary
| Operator | Example | Action | Boolean Equivalent |
|---|---|---|---|
| " " | "temperature monitoring" | Requires two terms to be adjacent to each other. In this example, only documents containing the phrase "temperature monitoring" will be shown. | ADJ |
| + | +temperature | Requires this term to be present as-is, eliminating the use of synonyms. This search query can be used in conjunction with other keywords to find only documents containing the word "temperature". | AND |
| - | -monitoring | Excludes results containing this term. Use this query in conjunction with other terms to find only documents not containing the word "monitoring" | NOT |
| () | (temperature monitoring) | Allows terms to be grouped when used with other operators. For example, searching for industrial -(temperature monitoring) will return only documents containing "industrial" but not "temperature" or "monitoring" | OR |
| * | monitor* | Acts as a wildcard. This example will return documents containing words "monitor", "monitoring", "monitored", etc | n/a |
Basic Tips
- Search is not case sensitive. Searching for LabVIEW is the same as searching for labview.
- Keep your query short and focused, including all relevant keywords. For example, searching for labview error is much more vague than labview error 1041.
- Usually, all punctuation and special characters are interpreted as delimiters and are ignored. See exceptions on the Syntax page. Be especially careful when using a minus sign in front of an error number, as it excludes it from the results.
- Search for keywords you would expect to see on a page. For example, terms pxi does not work are unlikely to appear in technical documentation. The query like analog output noise will return better search results.
Advanced Tips
- You locale settings identify your current geographical location and affect your search results. For example, if you set your country to Japan, Japanese documents will get boosted in your search results. Check your locale settings in the top right corner of the search page.
It's not what we make, it's what we make possible.
NI is a global leader in providing test, measurement, and embedded systems for engineers and scientists.
We were voted...
Privacy | Terms of Use | Other Legal Info | © 2013 National Instruments Corporation. All rights reserved.