Manual Results

Showing 1-10 of 11 results
Digital I/O Device Manual - Digital I/O Device Manual
This manual contains information about the Digital I/O Device, including pinouts and specifications.

USB-6501 Specifications
This document contains specifications for the USB-6501.
Edition Date: September 2017

USB-6501 Dimensional Drawings
This page provides dimensional drawings for the USB-6501.

DAQ Getting Started Guide for PCI/PCI Express
This document explains how to install the application and NI-DAQmx driver software, set up your PCI/PCI Express DAQ device, confirm the device is operating properly, and take your first measurement.
Edition Date: August 2016

DAQ Getting Started, Read Me First: NI-DAQmx and DAQ Device Installation Guide
This document contains instructions in English, French, German, Japanese, Korean, and Simplified Chinese. This document explains how to install the NI-DAQmx driver software, your data acquisition (DAQ) ...
Edition Date: February 2016

NI USB-6501 - Product Certification
Product Certification for NI USB-6501. This page lists all applicable certifications and standards, which includes the Declaration of Conformity and other safety, electromagnetic compatibility (EMC), and ...
Product Certifications: CE, FCC, C-Tick, MIC, RoHS

NI USB-6501 User Guide
The National Instruments USB-6501 is a Full Speed USB 2.0 device that provides 24 DIO channels and a 32-bit counter. This user guide describes how to use the device.
Edition Date: April 2015

DAQ Getting Started Guide
The DAQ Getting Started Guide describes how to confirm your NI data acquisition (DAQ) device is operating properly using the Measurement & Automation Explorer (MAX), configuring a task using the DAQ Assistant, ...
Edition Date: July 2013

NI USB-6501 Quick Start Guide
This document explains how to install the application and NI-DAQmx driver software, set up your NI USB-6501 bus-powered low-cost USB digital I/O device, confirm the system is operating properly, and take ...
Edition Date: February 2013

Ferrite Installation for USB Devices
This note to user describes how to install a ferrite onto interface cables to attain electromagnetic compatibility (EMC).
Edition Date: July 2009