Tutorial Results

Showing 1-8 of 8 results
NI PXIe-4844 Optical Sensor Interrogator Scaling Formulas for FBG Sensors www.ni.com/tutorial/52177/en/
Optical sensing can benefit many applications, whether the application needs to span long distances, immunity to EMI and high voltages or the ability to take multiple measurements ...

Making a Thermocouple Measurement With NI LabVIEW www.ni.com/tutorial/14338/en/
This document provides step-by-step instructions for wiring and configuring your NI DAQ device for use with a thermocouple. Before you begin using your NI DAQ hardware, you must in...

Making an RTD or Thermistor Measurement in LabVIEW www.ni.com/tutorial/14353/en/
This document provides step-by-step instructions for wiring and configuring your NI DAQ device for use with a resistance temperature detector (RTD). Before you begin using your NI ...

Tutorial: SCXI External Calibration with DAQmx 8.0 and Later www.ni.com/tutorial/4845/en/
Use this document to assist in performing an SCXI external calibration using NI-DAQmx 8.0 and later.

Configuring a Multichassis SCXI System www.ni.com/tutorial/3127/en/
This document is an example of how to assemble a multichassis SCXI system.

Creating a Large SCXI Switch Matrix www.ni.com/tutorial/3176/en/
A matrix is the most versatile switch topology. It is made up of M rows by N columns (M x N) that can connect any input to any output. With a matrix switching system, you can conne...

How to Use Thermocouples with an SCXI-1102 Module www.ni.com/tutorial/3461/en/
This application note describes how to set up and use the SCXI-1102 with thermocouples. It also describes the example programs that use the SCXI-1102 to make thermocouple measureme...

Archived: Using the SCXI-1129 as 1-wire Matrix www.ni.com/tutorial/4700/en/
This document has been archived and is no longer updated by National Instruments. This document discusses methods of using the SCXI-1129, 256 cross-point, 2-wire matrix for 1-wire ...