Tutorial Results

Showing 1-10 of 60 results
Connecting an External Reference Clock to a PXI Backplane Clock - NI-Sync 17.5 Manual www.ni.com/documentation/en/ni-sync/latest/nisynctasks/connect-reference-clock-pxi-clk10/
NI-Sync 17.0 or above. An external reference clock. Connect the external 10 MHz reference source to the CLKIN connector on the device in the system timing slot of the PXI chassis. Program the Route from ...

Routing and Synchronizing Triggers with niSync Connect Trigger Terminals - NI-Sync 17.5 Manual www.ni.com/documentation/en/ni-sync/latest/nisynctasks/connecting-and-synchronizing-triggers/
You can use Connect Trigger Terminals to link hardware trigger lines together. You can also use Connect Software Trigger to connect the global software trigger to a destination trigger terminal. Place ...

Creating and Reading Timestamps - NI-Sync 17.5 Manual www.ni.com/documentation/en/ni-sync/latest/nisynctasks/creating-and-reading-timestamps/
Use NI-Sync timestamp functions to record the board time when an event—like a clock edge, trigger, or future time event—occurs. You can use timestamps to measure clock drift and skew between devices, record ...

Enabling and Configuring a Phase-Locked Loop - NI-Sync 17.5 Manual www.ni.com/documentation/en/ni-sync/latest/nisynctasks/enabling-configuring-phase-locked-loop/
Complete the following steps to use an NI-Sync device's PLL circuit to phase lock the oscillator of the system timing module to an external clock. Connect an external clock to the ClkIn connector on the ...

Firing Triggers with a Synchronization Clock - NI-Sync 17.5 Manual www.ni.com/documentation/en/ni-sync/latest/nisynctasks/fire-trigger-sync-clock/
Setting and Dividing a Synchronization Clock After you have set a synchronization clock for the front and/or rear zones of your chassis, you can use the synchronization clock to control when triggers fire. ...

Locking to an External Time Reference - NI-Sync 17.5 Manual www.ni.com/documentation/en/ni-sync/latest/nisynctasks/locking-to-an-external-time-reference/
Setting an External Time Reference Place a While Loop on the diagram. Place an niSync Properties on the diagram inside the While Loop. Select TimingTime ReferenceIs Time Reference Present as the first ...

Routing a Synchronization Clock Along a Trigger Line - NI-Sync 17.5 Manual www.ni.com/documentation/en/ni-sync/latest/nisynctasks/route-sync-clock-along-trigger-line/
Setting and Dividing a Synchronization Clock Place Connect Trigger Terminals on the diagram. Wire a constant or control to source terminal and destination terminal. Select Synchronization Clock (Divided ...

Routing Clock Signals Using niSync Connect Clock Terminals - NI-Sync 17.5 Manual www.ni.com/documentation/en/ni-sync/latest/nisynctasks/routing-clock-signals/
Use this functionality to synchronize multiple chassis using a single 10 MHz backplane clock, distribute a generated clock to different devices and modules, replace the 10 MHz backplane clock with a more ...

Routing and Locking to the PLL Reference Clock - NI-Sync 17.5 Manual www.ni.com/documentation/en/ni-sync/latest/nisynctasks/routing-locking-pll-reference-clock/
Enabling and Configuring a Phase-Locked Loop Place Connect Clock Terminals on the diagram. Select ClkIn as the source terminal and select PXI_Clk10_In as the destination terminal. Place a While Loop on ...

Setting and Dividing a Synchronization Clock - NI-Sync 17.5 Manual www.ni.com/documentation/en/ni-sync/latest/nisynctasks/set-divide-synchronization-clock/
Place Initialize on the diagram. Place niSync Properties on the diagram and select Synchronization Clock PropertiesSynchronization Clock Source (PFI, PFI_LVDS) as the first property. Right-click the Synchronization ...