Search Entire Site

  • Search Within

Search Results

Showing 1-10 of 254 results
Deploying Your C Series Module in a Program Mode in LabVIEW FPGA - CompactRIO Controller Manual www.ni.com/documentation/en/compactrio-controller/latest/904xgs/program-mode-lv-fpga/
Locate your C Series module in your LabVIEW project. If you just created the project, all C Series modules appear under the FPGA Target, which indicates that they are in the LabVIEW FPGA program mode. ...

Installing the C Series Modules - CompactRIO Controller Manual www.ni.com/documentation/en/compactrio-controller/latest/904xgs/installing-modules/
Verify that power is not connected to the I/O connector(s) on the C Series module and the cRIO-904x. If the system is in a nonhazardous location, the cRIO-904x can be powered on when you install modules. ...

Connecting the Controller to the Host Computer - CompactRIO Controller Manual www.ni.com/documentation/en/compactrio-controller/latest/905xgs/connecting-to-host-computer/
Refer to cRIO-905x Ports and Connectors in the Features section for connector and port locations on the cRIO-905x. Complete the following steps to connect the cRIO-905x to the host computer using the USB ...

Installing Software on the Controller - CompactRIO Controller Manual www.ni.com/documentation/en/compactrio-controller/latest/904xgs/install-software-controller/
Complete the following steps to install software on the cRIO-904x. In MAX, expand your system under Remote Systems. Right-click Software. Select Add/Remove Software to launch the LabVIEW Real-Time Software ...

Connecting the Controller to Power - CompactRIO Controller Manual www.ni.com/documentation/en/compactrio-controller/latest/904xgs/connecting-to-power/
Refer to Ports and Connectors in the Features section for connector and port locations on the cRIO-904x. The cRIO-904x requires a 9 V to 30 V external power supply. The cRIO-904x filters and regulates ...

Changing Module Programming Modes in MAX - CompactRIO Controller Manual www.ni.com/documentation/en/compactrio-controller/latest/905xgs/changing-modes-in-max/
Complete the following steps to deploy your C Series module in a new program mode in MAX. Launch MAX on the host computer. Expand Remote Systems in the configuration tree and locate your cRIO-905x system. ...

Installing Software on the Controller - CompactRIO Controller Manual www.ni.com/documentation/en/compactrio-controller/latest/905xgs/install-software-controller/
In MAX, expand your system under Remote Systems. Right-click Software. Select Add/Remove Software to launch the LabVIEW Real-Time Software Wizard. You must log in to install software on the cRIO-905x. ...

Launching the BIOS Setup Utility - CompactRIO Controller Manual www.ni.com/documentation/en/compactrio-controller/latest/904x-bios-config/launch-bios-setup/
Complete the following steps to launch the BIOS setup utility. Connect a video monitor to the USB 3.1 Type-C DisplayPort connector on the cRIO-904x. In order to connect the monitor to the USB 3.1 Type-C ...

Setting a System Password - CompactRIO Controller Manual www.ni.com/documentation/en/compactrio-controller/latest/904xgs/set-system-password/
Complete the following steps to set a system password. The default username for the cRIO-904x is admin. There is no default password for the cRIO-904x, so you must leave the password field blank when logging ...

Installing Software on the Host Computer - CompactRIO Controller Manual www.ni.com/documentation/en/compactrio-controller/latest/904xgs/installing-software-host-computer/
If you do not currently have any NI software installed on your host computer, see the Install Software section for details on required software and in which order to install it. If you have some NI software ...