Search Entire Site

  • Search Within

Search Results

Showing 1-10 of 67 results
Adding Signals to Your CAN/LIN Module Channel Specification - FlexLogger 2019 R4 Manual www.ni.com/documentation/en/flexlogger/1.9/manual/adding-signals-to-can-lin/
Before adding CAN and LIN signals to your Channel Specification, you may need to create or manage the databases that provide the signal definitions and scaling information for your application. Refer to ...

Configuring Arithmetic Formula-Based Calculated Channels - FlexLogger 2019 R4 Manual www.ni.com/documentation/en/flexlogger/1.9/manual/configuring-formula-calculated-channels/
Add a calculated channel to analyze or scale data from existing hardware channels. A calculated channel produces a new value based on calculations performed on other channels in the system. On the Channel ...

Enabling and Configuring Triggers - FlexLogger 2019 R4 Manual www.ni.com/documentation/en/flexlogger/1.9/manual/enabling-configuring-triggers/
In your Logging specification document, select a Start condition for your trigger. Selecting any Triggering conditions will enable the trigger. Select from the following trigger start conditions: Test ...

Determining the Necessary Termination Resistance for Your Low-Speed CAN Device - FlexLogger 2019 R4 Manual www.ni.com/documentation/en/flexlogger/1.9/manual/determining-termination-resistance/
Low-Speed CAN requires termination at the Low-Speed CAN transceiver instead of on the cable. The termination requires two resistors: RTH for CAN_H and RTL for CAN_L. This configuration allows the NXP fault-tolerant ...

Using Network Synchronization in Your Acquisition - FlexLogger 2019 R4 Manual www.ni.com/documentation/en/flexlogger/1.9/manual/using-network-synchronization/
Synchronization-enabled devices use the IEEE 802.1AS protocol over the network and cannot synchronize with devices that use other protocols or IEEE 1588 profiles or vice versa. Ensure that your system ...

Viewing Logged Data in Excel - FlexLogger 2019 R4 Manual www.ni.com/documentation/en/flexlogger/1.9/manual/viewing-data-in-excel/
On the Data tab, right-click any log file and select Locate in Windows Explorer. Right-click the TDMS log file you want to open and select Open with»Excel Importer.

Using NI SystemLink Tags to Exchange Data between FlexLogger and LabVIEW - FlexLogger 2019 R4 Manual www.ni.com/documentation/en/flexlogger/1.9/manual/using-systemlink-tags-to-exchange-data/
The following FlexLogger and LabVIEW software versions are required to support the SystemLink tag feature: LabVIEW 2017 or later FlexLogger 2018 R4 or later Install LabVIEW. Install FlexLogger, ensuring ...

Configuring Sensors in Your Channel Specification - FlexLogger 2019 R4 Manual www.ni.com/documentation/en/flexlogger/1.9/manual/configuring-sensors-in-channel-spec/
Hover over the channel row to see the Configure gear . Click the gear for the channel you wish to configure. The channel configuration dialog opens. Use the Name field to specify the channel name, if necessary. ...

Viewing Data with Long History Graphs - FlexLogger 2019 R4 Manual www.ni.com/documentation/en/flexlogger/1.9/manual/viewing-long-history-graphs/
After adding the Long History Graph to your Screen and adding any channels to the graph that you want to view, complete the following steps to customize your graph properties. General Chart Options Adjust ...

Adding an I/O Plugin to Your Project - FlexLogger 2019 R4 Manual www.ni.com/documentation/en/flexlogger/1.9/manual/adding-io-plugin/
Add a custom plugin to your project. Extend the functionality of FlexLogger by importing a custom I/O plugin into your project. This topic demonstrates how to add an existing plugin to your project. FlexLogger ...