Search Entire Site

  • Search Within

Search Results

Showing 1-10 of 1,958 results
Creating Tasks with the API - NI-DAQmx 18.6 Manual www.ni.com/documentation/en/ni-daqmx/18.6/mxcncpts/createtaskapi/
The following example illustrates how to create a task with the API: Problem Create an NI-DAQmx task to measure temperature in the range 50°C to 200°C using a J-type thermocouple that is wired to channel ...

Creating Virtual Channels with the API - NI-DAQmx 18.6 Manual www.ni.com/documentation/en/ni-daqmx/18.6/mxcncpts/createchansapi/
The following example illustrates the difference between physical and virtual channels and demonstrates how to create virtual channels with the API. Problem Create an NI-DAQmx virtual channel to measure ...

RdyForXferEvent.DeassertCondCustomThreshold - NI-DAQmx 18.6 Manual www.ni.com/documentation/en/ni-daqmx/18.6/daqmx-prop-ref/task-rdyforxferevent-deassertcondcustomthreshold-2964/
Specifies in samples the threshold below which the Ready for Transfer Event deasserts. This threshold is an amount of space available in the onboard memory of the device. RdyForXferEvent.DeassertCond must ...

Ref.AnlgWin.DigFltr.TimebaseSrc - NI-DAQmx 18.6 Manual www.ni.com/documentation/en/ni-daqmx/18.6/daqmx-prop-ref/task-ref-anlgwin-digfltr-timebasesrc-2eed/
Specifies the terminal of the signal to use as the timebase of the digital filter. Not supported Not supported in VIs that run in a web application 2EED attr2EED.html

OverloadedChansExist - NI-DAQmx 18.6 Manual www.ni.com/documentation/en/ni-daqmx/18.6/daqmx-prop-ref/task-overloadedchansexist-2174/
Indicates if the device(s) detected an overload in any virtual channel in the task. Reading this property clears the overload status for all channels in the task. You must read this property before you ...

Pause.AnlgLvl.DigSync.Enable - NI-DAQmx 18.6 Manual www.ni.com/documentation/en/ni-daqmx/18.6/daqmx-prop-ref/task-pause-anlglvl-digsync-enable-2ef4/
Specifies whether to synchronize recognition of transitions in the signal to the internal timebase of the device. Not supported Not supported in VIs that run in a web application 2EF4 attr2EF4.html

Ref.DigPattern.Pattern - NI-DAQmx 18.6 Manual www.ni.com/documentation/en/ni-daqmx/18.6/daqmx-prop-ref/task-ref-digpattern-pattern-2187/
Specifies the digital pattern that must be met for the Reference Trigger to occur. Not supported Not supported in VIs that run in a web application 2187 attr2187.html

Pause.AnlgWin.Btm - NI-DAQmx 18.6 Manual www.ni.com/documentation/en/ni-daqmx/18.6/daqmx-prop-ref/task-pause-anlgwin-btm-1375/
Specifies the lower limit of the window. Specify this value in the units of the measurement or generation. Not supported Not supported in VIs that run in a web application 1375 attr1375.html

RegenMode - NI-DAQmx 18.6 Manual www.ni.com/documentation/en/ni-daqmx/18.6/daqmx-prop-ref/task-regenmode-1453/
Specifies whether to allow NI-DAQmx to generate the same data multiple times. If you enable regeneration and write new data to the buffer, NI-DAQmx can generate a combination of old and new data, a phenomenon ...

SampClkTimebase.OutputTerm - NI-DAQmx 18.6 Manual www.ni.com/documentation/en/ni-daqmx/18.6/daqmx-prop-ref/task-sampclktimebase-outputterm-18f9/
Specifies the terminal to which to route the Sample Clock Timebase. Not supported Not supported in VIs that run in a web application 18F9 attr18F9.html