Search Entire Site

  • Search Within

Search Results

Showing 1-10 of 2,037 results
Creating Virtual Channels with the API - NI-DAQmx 19.1 Manual https://www.ni.com/documentation/en/ni-daqmx/19.1/mxcncpts/createchansapi/
The following example illustrates the difference between physical and virtual channels and demonstrates how to create virtual channels with the API. Problem Create an NI-DAQmx virtual channel to measure ...

Creating Tasks with the API - NI-DAQmx 19.1 Manual https://www.ni.com/documentation/en/ni-daqmx/19.1/mxcncpts/createtaskapi/
The following example illustrates how to create a task with the API: Problem Create an NI-DAQmx task to measure temperature in the range 50°C to 200°C using a J-type thermocouple that is wired to channel ...

AI.ChanCal.ApplyCalIfExp - NI-DAQmx 19.1 Manual https://www.ni.com/documentation/en/ni-daqmx/19.1/daqmx-prop-ref/task-ai-chancal-applycalifexp-2299/
Specifies whether to apply the channel calibration to the channel after the expiration date has passed. Not supported Not supported in VIs that run in a web application 2299 attr2299.html

AI.Bridge.ShuntCal.Select - NI-DAQmx 19.1 Manual https://www.ni.com/documentation/en/ni-daqmx/19.1/daqmx-prop-ref/task-ai-bridge-shuntcal-select-21d5/
Specifies which shunt calibration switch(es) to enable. Use AI.Bridge.ShuntCal.Enable to enable the switch(es) you specify with this property. Not supported Not supported in VIs that run in a web application ...

AI.Bridge.ShuntCal.ShuntCalASrc - NI-DAQmx 19.1 Manual https://www.ni.com/documentation/en/ni-daqmx/19.1/daqmx-prop-ref/task-ai-bridge-shuntcal-shuntcalasrc-30ca/
Specifies whether to use internal or external shunt when Shunt Cal A is selected. Not supported Not supported in VIs that run in a web application Built-In 10200 Use the internal shunt. User Provided 10167 ...

AI.Bridge.ElectricalUnits - NI-DAQmx 19.1 Manual https://www.ni.com/documentation/en/ni-daqmx/19.1/daqmx-prop-ref/task-ai-bridge-electricalunits-2f87/
Specifies from which electrical unit to scale data. Select the same unit that the sensor data sheet or calibration certificate uses for electrical values. Not supported Not supported in VIs that run in ...

AI.Bridge.InitialVoltage - NI-DAQmx 19.1 Manual https://www.ni.com/documentation/en/ni-daqmx/19.1/daqmx-prop-ref/task-ai-bridge-initialvoltage-17ed/
Specifies in volts the output voltage of the bridge while not under load. NI-DAQmx subtracts this value from any measurements before applying scaling equations. If you set AI.Bridge.InitialRatio, NI-DAQmx ...

AI.Bridge.Balance.FinePot - NI-DAQmx 19.1 Manual https://www.ni.com/documentation/en/ni-daqmx/19.1/daqmx-prop-ref/task-ai-bridge-balance-finepot-18f4/
Specifies by how much to compensate for offset in the signal. This value can be between 0 and 4095. Not supported Not supported in VIs that run in a web application 18F4 attr18F4.html

AI.ChanCal.EnableCal - NI-DAQmx 19.1 Manual https://www.ni.com/documentation/en/ni-daqmx/19.1/daqmx-prop-ref/task-ai-chancal-enablecal-2298/
Specifies whether to enable the channel calibration associated with the channel. Not supported Not supported in VIs that run in a web application 2298 attr2298.html

AI.Bridge.TwoPointLin.Second.ElectricalVal - NI-DAQmx 19.1 Manual https://www.ni.com/documentation/en/ni-daqmx/19.1/daqmx-prop-ref/task-ai-bridge-twopointlin-second-electricalval-2f8c/
Specifies the second electrical value, corresponding to AI.Bridge.TwoPointLin.Second.PhysicalVal. Specify this value in the unit indicated by AI.Bridge.ElectricalUnits. Not supported Not supported in VIs ...