Search Entire Site

  • Search Within

Search Results

Showing 1-10 of 162 results
NI ELVIS III 1.0 Manual - NI ELVIS III 1.0 Manual www.ni.com/documentation/en/ni-elvis-iii/1.0/manual/manual-overview/
The NI Educational Laboratory Virtual Instrumentation Suite III (NI ELVIS III) is an engineering laboratory solution for project-based learning. It combines a suite of commonly used lab instruments, flexible ...

Connecting Analog Input Signals - NI ELVIS III 1.0 Manual www.ni.com/documentation/en/ni-elvis-iii/1.0/appendix/conaisig/
The following table summarizes the recommended input configuration for both floating signal sources and ground-referenced signal sources. Analog Input Configuration Analog Input Ground-Referenced Setting ...

Oscilloscope Circuitry - NI ELVIS III 1.0 Manual www.ni.com/documentation/en/ni-elvis-iii/1.0/appendix/scopecircuitry/
The NI ELVIS III provides a 14-bit, 100 MS/s oscilloscope. The oscilloscope has four input channels and one digital trigger input. Each analog channel can input signals using AC or DC coupling. The maximum ...

Oscilloscope - NI ELVIS III 1.0 Manual www.ni.com/documentation/en/ni-elvis-iii/1.0/appendix/too-scope/
This section explains the Oscilloscope of the NI ELVIS III. Oscilloscope Circuitry Connecting Oscilloscope Signals Vertical Range and User Control Offset Sample Rate and Decimation Memory Depth Trigger ...

Analog Output Circuitry - NI ELVIS III 1.0 Manual www.ni.com/documentation/en/ni-elvis-iii/1.0/appendix/aocircuitry/
The NI ELVIS III provides four analog output channels on the NI ELVIS III Prototyping Board. These channels are controlled independently by the FPGA. Each analog output channel consists of a DAC and an ...

Launching the Soft Front Panels - NI ELVIS III 1.0 Manual www.ni.com/documentation/en/ni-elvis-iii/1.0/getting-started/launching-soft-front-panels/
Connect the NI ELVIS III to your host computer via USB, Ethernet, or a wireless network. Refer to Connecting the Device to Your Host Computer for detailed connection information. Launch Measurements Live ...

Securing the Device - NI ELVIS III 1.0 Manual www.ni.com/documentation/en/ni-elvis-iii/1.0/getting-started/securing-the-device/
You must first install the NI ELVIS III Software Bundle to use MAX. Setting a New Password By default, each remote device includes a single user with the following name and password: User name: admin Password: ...

Creating an NI ELVIS III Application - NI ELVIS III 1.0 Manual www.ni.com/documentation/en/ni-elvis-iii/1.0/getting-started/creating-an-elvis-iii-application/
Creating an NI ELVIS III Project Programming the Control I/O This tutorial does not require the NI ELVIS III Prototyping Board.

Analyzer & Hardware Settings (IV Analyzer) - NI ELVIS III 1.0 Manual www.ni.com/documentation/en/ni-elvis-iii/1.0/instrument-ref/analyzer-hardware-settings-iv/
The following Analyzer mode settings are available. Diode Setting Description Analyzer mode Device to analyze – select Diode. Series resistance Appears when Diode is selected in Analyzer mode. This controls ...

Display Window (IV Analyzer) - NI ELVIS III 1.0 Manual www.ni.com/documentation/en/ni-elvis-iii/1.0/instrument-ref/display-window-iv/
Cursor Mode Description Off Turns off the cursors. Manual Cursor positions are not restricted to the acquired data points on a trace. Track Cursor positions are restricted to the acquired data points on ...