Search Entire Site

  • Search Within

Search Results

Showing 1-10 of 147 results
Allocate Named Waveform (G Dataflow) - NI-FGEN 19.1 Manual www.ni.com/documentation/en/ni-fgen/19.1/ni-fgen-node-ref/allocate-named-waveform/
Specifies the initial size of a named waveform so that it can be allocated in onboard memory before loading the associated data. Not supported Not supported in VIs that run in a web application After this ...

Configure Channels (G Dataflow) - NI-FGEN 19.1 Manual www.ni.com/documentation/en/ni-fgen/19.1/ni-fgen-node-ref/configure-channels/
Configures the channels that are used with the waveform generator instrument. If you call this node, you must call it immediately after initializing your session and before configuring any properties or ...

NI-FGEN Soft Front Panel and InstrumentStudio - NI-FGEN 19.1 Manual www.ni.com/documentation/en/ni-fgen/19.1/manual/sfp-instrumentstudio/
When you install NI-FGEN on a 64-bit system, you can monitor, control, and record measurements from supported devices using InstrumentStudio. InstrumentStudio is a software-based front panel application ...

Configure Clock Mode (G Dataflow) - NI-FGEN 19.1 Manual www.ni.com/documentation/en/ni-fgen/19.1/ni-fgen-node-ref/configure-clock-mode/
Selects the clock mode for the waveform generator. The waveform generator must not be in the Generating state when you call this node. Not supported Not supported in VIs that run in a web application You ...

Delete Script (G Dataflow) - NI-FGEN 19.1 Manual www.ni.com/documentation/en/ni-fgen/19.1/ni-fgen-node-ref/delete-script/
Deletes the specified script from onboard memory. Not supported Not supported in VIs that run in a web application niFgen Delete Script.vi <helpdir>:/nifgenlv.chm::/niFgen_Delete_Script.html session in ...

Create Arbitrary Sequence (G Dataflow) - NI-FGEN 19.1 Manual www.ni.com/documentation/en/ni-fgen/19.1/ni-fgen-node-ref/create-arbitrary-sequence/
Creates an arbitrary sequence from an array of waveform references and an array of corresponding loop counts. The waveform generator must not be in the Generating state when you call this node. Not supported ...

External Calibration Nodes - NI-FGEN 19.1 Manual www.ni.com/documentation/en/ni-fgen/19.1/ni-fgen-node-ref/external-calibration-nodes/
Use the NI-FGEN external calibration nodes to perform external calibration when following the calibration procedure for your waveform generator model.

Create Waveform (From Data » DBL) (G Dataflow) - NI-FGEN 19.1 Manual www.ni.com/documentation/en/ni-fgen/19.1/ni-fgen-node-ref/create-waveform-from-data-dbl/
Creates an onboard waveform from double-precision floating-point data for use in arbitrary waveform or arbitrary sequence output modes. The waveform generator must not be in the Generating state when you ...

Write Named Waveform (DBL) (G Dataflow) - NI-FGEN 19.1 Manual www.ni.com/documentation/en/ni-fgen/19.1/ni-fgen-node-ref/write-named-waveform-dbl/
Writes floating-point data to the named waveform in onboard memory. If streaming is enabled, you can write more data than the allocated waveform size in onboard memory. By default, a call to this node ...

Route Signal Out (G Dataflow) - NI-FGEN 19.1 Manual www.ni.com/documentation/en/ni-fgen/19.1/ni-fgen-node-ref/route-signal-out/
Routes various signals to the backplane trigger lines or front panel terminals. The waveform generator must not be in the Generating state when you call this node. Not supported Not supported in VIs that ...