Search Entire Site

  • Search Within

Search Results

Showing 1-8 of 8 results
Using the mmWave Transceiver System as a Multichannel Transceiver - NI-mmWave 15.3 Manual www.ni.com/documentation/en/ni-mmwave/15.3/manual/use-mts-as-multichannel-transceiver/
The NI mmWave Reference Project contains an example VI that demonstrates how to use the mmWave Transceiver System as a multichannel transceiver. Before running the VI, examine the hardware setup and ensure ...

Fast Configuration Overview - NI-mmWave 15.3 Manual www.ni.com/documentation/en/ni-mmwave/15.3/manual/fast-configuration-overview/
The mmWave Transceiver System supports fast configuration of gain and mmWave port switches.

Fast Gain Ranging - NI-mmWave 15.3 Manual www.ni.com/documentation/en/ni-mmwave/15.3/manual/fast-gain-ranging/
The PXIe-7902 High-Speed Serial Instrument can send commands to the PXIe-3620 RF Upconverter and Downconverter Module and mmWave radio heads directly from the FPGA. By bypassing the host for configuration, ...

LO Sharing - NI-mmWave 15.3 Manual www.ni.com/documentation/en/ni-mmwave/15.3/manual/lo-sharing/
You can configure the PXIe-3620 RF Upconverter and Downconverter Module module to use an external local oscillator (LO) signal when preparing the signal for upconversion or downconversion. You can configure ...

Fast mmWave Port Switching - NI-mmWave 15.3 Manual www.ni.com/documentation/en/ni-mmwave/15.3/manual/fast-mmwave-port-switching/
You can configure the mmRH-3602 mmWave Radio Head to route mmWave signals to and/or from one of the following two mmRH-3602 radio head antenna ports: TX1/RX1 and RX2. Use the NI mmWave Reference Project ...

NI-mmWave Configuration API - NI-mmWave 15.3 Manual www.ni.com/documentation/en/ni-mmwave/15.3/manual/ni-mmwave-configuration-api/
scope Input Most VIs in the NI-mmWave Configuration API require a scope input string. This string specifies the scope of the configuration for the VI. Each VI has a unique set of valid values for this ...

Synchronization Overview - NI-mmWave 15.3 Manual www.ni.com/documentation/en/ni-mmwave/15.3/manual/synchronization-overview/
Synchronization occurs between all baseband transmitters and baseband receivers in your system so that generation and acquisition can begin on the FPGA during the same cycle. For example, in the bidirectional ...

System Calibration Utility - NI-mmWave 15.3 Manual www.ni.com/documentation/en/ni-mmwave/15.3/manual/system-calibration-utility/
The system calibration utility is included in the NI mmWave Reference Project. This utility calibrates the system by measuring in-phase/quadrature (I/Q) impairments for each channel. To use this utility, ...