Search Entire Site

  • Search Within

Search Results

Showing 1-10 of 131 results
Adjust Offset Range Calibration (G Dataflow) - NI-SCOPE 19.1, 19.5, 19.6 Manual https://www.ni.com/documentation/en/ni-scope/19.1/scopenodes/adjust-offset-range-calibration/
Externally calibrates the vertical offset. Not supported Not supported in VIs that run in a web application session in The instrument handle that you obtain from Initialize External Calibration. The handle ...

CableSense Signal Stop (G Dataflow) - NI-SCOPE 19.1, 19.5, 19.6 Manual https://www.ni.com/documentation/en/ni-scope/19.1/scopenodes/cablesense-signal-stop/
Disables the CableSense signal on all channels of an oscilloscope for which the signal is enabled. Not supported Not supported in VIs that run in a web application This node supports the following hardware: ...

Change Calibration Password (G Dataflow) - NI-SCOPE 19.1, 19.5, 19.6 Manual https://www.ni.com/documentation/en/ni-scope/19.1/scopenodes/change-calibration-password/
Changes the password used to begin an external calibration session. This node verifies old password against the password stored in the device's EEPROM. If the two passwords match, the node stores the new ...

Configure Clock (G Dataflow) - NI-SCOPE 19.1, 19.5, 19.6 Manual https://www.ni.com/documentation/en/ni-scope/19.1/scopenodes/configure-clock/
Configures the properties for synchronizing the digitizer to an external clock or sending the digitizer's clock output to be used as a synchronizing clock for other devices. Not supported Not supported ...

NI-SCOPE Nodes - NI-SCOPE 19.1, 19.5, 19.6 Manual https://www.ni.com/documentation/en/ni-scope/19.1/scopenodes/default/
Nodes for programming oscilloscopes.

Fetch (Single Waveform » 1D Complex DBL) (G Dataflow) - NI-SCOPE 19.1, 19.5, 19.6 Manual https://www.ni.com/documentation/en/ni-scope/19.1/scopenodes/fetch-single-waveform-1d-complex-dbl/
Retrieves data from single channels and records. This function returns a one-dimensional array of complex, scaled waveforms. Not supported Not supported in VIs that run in a web application session in ...

Fetch (Single Waveform » Cluster) (G Dataflow) - NI-SCOPE 19.1, 19.5, 19.6 Manual https://www.ni.com/documentation/en/ni-scope/19.1/scopenodes/fetch-single-waveform-cluster/
Retrieves the waveform the digitizer has acquired for the specified channel from a previously initiated acquisition. This function returns scaled voltage waveforms in a cluster that includes timing information. ...

Fetch (Single Waveform » 1D I16) (G Dataflow) - NI-SCOPE 19.1, 19.5, 19.6 Manual https://www.ni.com/documentation/en/ni-scope/19.1/scopenodes/fetch-single-waveform-1d-i16/
Retrieves data from a single channel and record. Returns a one-dimensional array of binary 16-bit values. Not supported Not supported in VIs that run in a web application session in Handle that identifies ...

Fetch (Single Waveform » WDT) (G Dataflow) - NI-SCOPE 19.1, 19.5, 19.6 Manual https://www.ni.com/documentation/en/ni-scope/19.1/scopenodes/fetch-single-waveform-wdt/
Retrieves a waveform the digitizer has acquired for the specified channel. This function returns scaled voltage data in a waveform data type that includes timing information. Not supported Not supported ...

Get Actual Sample Mode (G Dataflow) - NI-SCOPE 19.1, 19.5, 19.6 Manual https://www.ni.com/documentation/en/ni-scope/19.1/scopenodes/get-actual-sample-mode/
Returns the sample mode the digitizer is currently using. Not supported Not supported in VIs that run in a web application session in Handle that identifies the NI-SCOPE instrument session as previously ...