Manual Results

Showing 1-10 of 22 results

USB-6210 Specifications https://www.ni.com/pdf/manuals/375194d.pdf
This document contains specifications for the USB-6210.
Edition Date: September 2017

DAQ Multifunction I/O (MIO) and Simultaneous Multifunction I/O (SMIO) Devices Calibration Procedure https://www.ni.com/pdf/manuals/370937w.pdf
This document contains information about calibrating National Instruments B, E, M, S, and X Series data acquisition (DAQ) devices, which include the following devices: NI 6010, NI 6013/6014/6015/6016, ...
Edition Date: October 2019

USB-6210 Product Certifications https://www.ni.com/en-us/support/documentation/product-certifications/model.usb-6210.html
This page documents all the applicable standards and certifications for the USB-6210 and provides downloadable certifications.

USB-6210 Dimensional Drawings https://www.ni.com/en-us/support/documentation/dimensional-drawings/model.usb-6210.html
This page provides dimensional drawings for the USB-6210.

USB-6001 Pinout - Multifunction I/O Device Manual https://www.ni.com/documentation/en/multifunction-io-device/latest/usb-6001/pinout/
Signal Descriptions Signal Reference Description AI GND — Analog Input Ground—The reference point for single-ended analog input measurements. AI <0..7> Varies Low-cost USB SE 1st pgh Analog Input Channels—For ...

USB-6289 Mass Termination Pinout - Multifunction I/O Device Manual https://www.ni.com/documentation/en/multifunction-io-device/latest/usb-6289/pinout-massterm/
[SPC 610/16: Added conreffed Default C/T Terminals table when I noticed its absence on review. Default Counter/Timer Terminals Counter/Timer Signal Default PFI Terminal CTR 0 SRC PFI 8 CTR 0 GATE PFI 9 ...

USB-6009 Pinout - Multifunction I/O Device Manual https://www.ni.com/documentation/en/multifunction-io-device/latest/usb-6009/pinout/
Signal Descriptions Signal Reference Description GND — Ground—The reference point for the single-ended analog input measurements, analog output voltages, digital signals, +5 VDC supply, and +2.5 VDC at ...

USB-6002 Pinout - Multifunction I/O Device Manual https://www.ni.com/documentation/en/multifunction-io-device/latest/usb-6002/pinout/
Signal Descriptions Signal Reference Description AI GND — Analog Input Ground—The reference point for single-ended analog input measurements. AI <0..7> Varies Low-cost USB SE 1st pgh Analog Input Channels—For ...

USB-6000 Pinout - Multifunction I/O Device Manual https://www.ni.com/documentation/en/multifunction-io-device/latest/usb-6000/pinout/
Signal Descriptions Signal Reference Description D GND — Low-cost USB Digital Ground—The reference point for digital signals. AI GND — Analog Input Ground—The reference point for analog input measurements. ...