Search Entire Site

  • Search Within

Search Results

Showing 1-10 of 52 results
Connect Channels (Connect Channels (Multiple)) (G Dataflow) - NI-SWITCH 17.5 to 20.1 Manual https://www.ni.com/documentation/en/ni-switch/17.5/ni-switch-node-ref/niswitch-connect-channels-multiple/
Creates connections between multiple channels. Specify connections with two endpoints only or the explicit path between two endpoints. NI-SWITCH calculates and uses the shortest path between the channels. ...

Wait For Debounce (G Dataflow) - NI-SWITCH 17.5 to 20.1 Manual https://www.ni.com/documentation/en/ni-switch/17.5/ni-switch-node-ref/niswitch-wait-for-debounce/
Pauses until all created paths have settled. Not supported Not supported in VIs that run in a web application Call this node before the niSwitch Get Relay Count node to ensure an accurate relay count. ...

Send Software Trigger (G Dataflow) - NI-SWITCH 17.5 to 20.1 Manual https://www.ni.com/documentation/en/ni-switch/17.5/ni-switch-node-ref/niswitch-send-software-trigger/
Sends a software trigger to the switch module specified in the NI-SWITCH session. Not supported Not supported in VIs that run in a web application When the trigger input parameter is set to Software Trigger ...

Route Trigger Input (G Dataflow) - NI-SWITCH 17.5 to 20.1 Manual https://www.ni.com/documentation/en/ni-switch/17.5/ni-switch-node-ref/niswitch-route-trigger-input/
Routes the input trigger from the front or rear connector to a trigger bus line (TTLx). This node should be used when scanning a module in a different NI-SWITCH session that is not directly cabled to the ...

Commit (G Dataflow) - NI-SWITCH 17.5 to 20.1 Manual https://www.ni.com/documentation/en/ni-switch/17.5/ni-switch-node-ref/niswitch-commit/
Downloads the configured scan list and trigger settings to hardware. Calling this node is optional as it is implicitly called during the niSwitch Initiate Scan node. Use this node to arm triggers in a ...

Get Path (G Dataflow) - NI-SWITCH 17.5 to 20.1 Manual https://www.ni.com/documentation/en/ni-switch/17.5/ni-switch-node-ref/niswitch-get-path/
Returns a string that identifies the explicit path created with the niSwitch Connect Channels node. Pass this string to the niSwitch Set Path node to establish the exact same path in future connections. ...

Utility Nodes - NI-SWITCH 17.5 to 20.1 Manual https://www.ni.com/documentation/en/ni-switch/17.5/ni-switch-node-ref/utility-nodes/
Use the NI-SWITCH utility nodes to exercise additional features of an NI switch.

Switch Is Scanning (G Dataflow) - NI-SWITCH 17.5 to 20.1 Manual https://www.ni.com/documentation/en/ni-switch/17.5/ni-switch-node-ref/niswitch-switch-is-scanning/
Indicates the status of the scan. Not supported Not supported in VIs that run in a web application session in Control that identifies a particular NI-SWITCH session established with the niSwitch Initialize ...

Disable (G Dataflow) - NI-SWITCH 17.5 to 20.1 Manual https://www.ni.com/documentation/en/ni-switch/17.5/ni-switch-node-ref/niswitch-disable/
Places the switch module in a quiescent state where it has minimal or no impact on the system to which it is connected. This node disconnects all channels, and any scan in progress is aborted. Not supported ...

niSwitch Properties (G Dataflow) - NI-SWITCH 17.5 to 20.1 Manual https://www.ni.com/documentation/en/ni-switch/17.5/ni-switch-node-ref/niswitch-prop-node/
Gets (reads) and/or sets (writes) properties of the NI-SWITCH driver. Not supported Not supported in VIs that run in a web application niswitch in Control that specifies inputs to the property node. error ...